How To Problem Shoot Your Water Heater Not Working

A problem with your water heater can be bad for your schedule and does not allow you to perform even the day-to-day activities such as bathing. While you can ask your family members and friends questions like “Which can be the best plumbers near me?”, water heating problems and issues do result in loss of time. A variety of issues can affect the health of your water heater. These issues include leaks, water temperature, noise, discoloration, odor, and others. When you are wondering “Which can be the best options for water heater replacement near me?” a leading plumber Carlsbad can provide valuable and timely solutions.

Read the article and go through the information given below to know what you can do problem shoot your water heater that is not working. However, before you start with any of the steps and methods that are given below, ensure that you have switched off the power supply to your water heater. You need to switch off the circuit breaker or the fuse to ensure that the water heater is not getting any electricity while you resolve the problem.

Issues With Water Temperature

Many kinds of issues may affect the temperature of the water that comes out from your water heater. Water can be either too hot or not adequately warm. Sometimes a water heater may not give any hot water at all due to the underlying defect.

The heating element of the water may become faulty due to repeated and prolonged use. In such a scenario, the water heater will not heat water. Defects with the thermostat of the machine or lack of flow of power/electricity may also result in a water heater that does not perform well and does not heat water. You may have to replace the fuse if it is blown out or reset the circuit breaker to ensure a smooth power supply. If the thermostat and the heating element are not functioning even after receiving power, they require a replacement.

If you get too hot water from your water heater, it indicates that there is a problem with the setting of the thermostat. The temperature range for the upper and lower limit of a thermostat is 110 degrees Fahrenheit and 140 degrees Fahrenheit.

Sometimes a water heater may not heat water adequately. The undersized water heaters may fail to heat the water enough. Ensure that any water heater you buy, and use has 75% of its capacity for hot water. You may also have to check for cross-connections. Turn off the water supply to the water heater and open the faucet of the heater. If the water is still flowing, there is a cross-connection. You also need to check the heating elements and the thermostat and replace them if needed.

Water Leaks

A Water Heater Leak May Occur Due To Different Causes Including:

  • A faulty T&P (temperature and pressure) relief valve.
  • Overheating.
  • Excessive pressure.
  • Water tank leak.
  • A stuck valve.
  • Loose bolts of the heating element.
  • Defective gasket.

You will have to check the temperature and pressure relief valve. You can place a bucket underneath the overhead pipe and open the valve. Now remove all the debris that might have accumulated on the valve. If the valve is still leaking, you need to replace or repair it. You can reduce the setting of your thermostat to reduce the pressure which can prevent leaking. Also, take a wrench and tighten all the loose bolts and screws of the pipe and heating element.

Bad gaskets and issues such as corrosion may cause a leaking leakage in the tank of the water heater. The gaskets can be replaced to ensure that the water heater does not leak further.

Odor And Discoloration Issues

A defective anode terminal or corrosion may cause discoloration and rusty water. The anode may require a replacement if it is defective. A magnesium rod replacement can be best for the anode. Your decaying anode may also cause odor issues, as it may smell like rotten eggs. To remove the odor, you may have to treat the pipes and tanks of the water heater with a three-percent hydrogen peroxide solution (two-pint hydrogen peroxide to 40-gallon water solution). You can also install a plastic-lined water heater replacement if the smell persists.

Noise Issues

Over a period, the water heaters may start to contain sediments that they get from water. These sediments may cause rumbling noise. The water heater can be replaced to ensure that the noise is stopped. Sometimes this scale of the water heater may require cleaning to stop the whining sound.

Conclusion

You can search Google with keywords like “Which are the best services for water heater repair near me?” to find resourceful and expert plumbing service providers that can solve water heating and piping network issues at any time. Also, ensure that the appliances connected to the plumbing and pipe network of your home are inspected and maintained timely to prevent any sudden issues.

Back to top